How to install the TV bracket

1.Before installing the TV bracket, carefully check the load-bearing capacity of the wall. The interior walls of many rooms’ compartments are all hollow, and wall mounted televisions cannot be installed at all. They can only be placed on cabinets to watch. According to the national “Television Installation Service Standard”, the load-bearing capacity of the installation wall should be ensured to be no less than 4 times the actual load-bearing capacity of the television. After installation, the television should not tilt when tilted 10 degrees back and forth.


2. The installation environment is also very important. Firstly, let’s check the indoor humidity. No matter what brand of TV it is, it cannot be kept in a humid environment for a long time. As many TVs do not come with waterproof protection, the internal circuit board of the heat dissipation grid will directly come into contact with the outside air. If the TV is installed too close to the humidity, it will damage the machine; In addition to the air humidity, you should also watch the installation position of the Tv Stand Cart. Generally speaking, the distance to watch TV should be at least 3-5 times the diagonal distance of the display screen.


3. The selection of Tv Stand Cart is extremely important. Everyone knows that TVs are much lighter in quality than traditional CRTs. However, if not installed properly, there is still a high risk of falling off the back wall, with very serious consequences. When choosing a TV flower rack, it is important to choose a suitable wall mounting bracket with guaranteed strength and durability.


4. Television racks need to be classified according to the type of wall, and different installation methods should be used for different walls. If a regular brick wall requires the installation of a Tv Stand Cart, all you need to do is punch a hole in the wall with an impact drill, insert a plastic expansion pipe, and finally fix the TV hanger with screws to hang the TV.


5. If it is a panel wall, it is necessary to first select the positioning of the Tv Stand Cart. First, use the art knife to make a small hole in the fixed position, and then place a 2cm thick long wooden batten on the TV rotary rack, so that the Self-tapping screw can pass through the gypsum board and enter the wooden batten during self tapping to increase the force area.


How to Install a TV bracket

1. When selecting a TV bracket, it is important to note whether the TV hole positions are regular, whether there are four hole positions, and whether they are rectangular or square in shape.


2. When choosing a TV bracket, there are many options, generally divided into ordinary non adjustable stand, ordinary adjustable stand, single cantilever stand, double arm stand, and so on. We must be careful when choosing.


3. Installing hanging racks is also a very important issue, and it is necessary to seek professional personnel for installation or have professional guidance nearby to avoid some safety issues.